ABC FREE |
|
ABC is a computer program that uses the method of stress characteristics (also known as the slip line method) to solve the classical geotechnical bearing capacity problem of a rigid foundation, resting on a cohesive-frictional soil mass, loaded to failure by a central vertical force.
|
AllPile |
|
AllPile is a Windows-based analysis program that handles virtually all types of piles, including steel pipes, H-piles, pre-cast concrete piles, auger-cast piles, drilled shafts, timber piles, jetted piles, tapered piles, piers with bell, micropiles (minipiles), uplift anchors, uplift plate, and shallow foundations.
|
BearCap |
|
BearCap is a bearing capacity analysis program.
|
CE.CA.P. |
|
Ce.Ca.P. is a complete package for the analysis and design of foundations; because of its completness, flexibility ad user-friendliness it is a fundamental instrument for any kind of geothecnical project.
|
DC-Bearing |
|
Analysis of bearing capacity acc. to DIN 4017 / DIN 1054:2005 / SIA 267 / OENORM B 4435-2 / OENORM B 1997-1-1 / Eurocode 7 / Terzaghi / Brinch Hansen
|
GEO5 Piles |
|
The program is designed to verify vertical bearing capacity of a pile loaded both in tension and compression, pile settlement as well as bearing capacity of a solitary pile.
|
GEO5 Spread Footing |
|
This program for the design of spread footings subject to general loading. It computes bearing capacity, settlement and rotation of a footing, and determines required longitudinal and shear reinforcement.
|
Loadcap |
|
This application permits the computation of the marginal load for calculating the bearing capacity factors.
|
PEYSANJ |
|
PEYSANJ is a series of geotechnical engineering tools bundled as a single software.
|
PROKON Pile Capacity |
|
Determination of the bearing capacity of piles. The capacity calculations take into account the effects of pile length and diameter, installation type and soil conditions. Analysis output includes pile deformation calculations.
|
WinFAD |
|
WinFAD is a computer program developed to assist the bridge engineer in designing or checking spread and pile concrete footings subjected to eccentrically applied axial loads that produce biaxial bending moments.
|
|
|
|
|
|
|
