ACCECALC |
|
The program analyses the behaviour of the rock slopes under seismic conditions. It evaluates the displacements of a rock block subject to dynamic forces, on the basis of a given accelerogram.
|
ASPEN |
|
ASPEN is the Newsoft geo-technical software aimed at the analysis of natural or artificial slope stability with the most common limit equilibrium methods.
|
Galena |
|
GALENA is the most powerful and flexible slope stability analysis system available, allowing you to analyze ground stability quickly and accurately using models that simulate geological conditions.
|
GEO5 |
|
The suite also includes highly sophisticated applications for the analysis of tunnels, building damage due to tunnelling, stability of rock slopes etc.
|
Geosolve SLOPE |
|
SLOPE is a computer program for analysing the stability of slopes. The program is also applicable to earth pressure and bearing capacity problems. Optional facilities are available for the analysis and design of reinforced soil.
|
GeoStru Slope |
|
Stability analysis of slopes in loose or rocky soils with the traditional methods of geotechnics (Limit Equilibrium) and Discrete Element Method.
|
GSLOPE |
|
GSLOPE allows geotechnical engineers to carry out limit equilibrium slope stability analysis of existing natural slopes, unreinforced man-made slopes, or slopes with soil reinforcement.
|
LimitState:GEO |
|
LimitState:GEO is the revolutionary geotechnical stability analysis software that can be used to rapidly determine the critical failure mechanism and margin of safety for any type of problem, including those involving: slope stability; retaining walls; deep excavations; reinforced earth; gabion walls; foundations; rock slopes; seismic forces; soil-structure interaction problems.
|
LISA and DLISA FREE |
|
LISA uses Monte Carlo simulation of the infinite slope equation to estimate a probability of slope failure for use in relative stability assessment of natural slopes. It runs under MS-DOS.
|
midas GTS |
|
midas GTS is a Geotechnical and Tunnel analysis System, based on state-of-the-art finite element and graphical technology. midas GTS enables the engineers to intuitively generate complex geotechnical models.
|
Phase |
|
Phase2 is a 2D finite element program which can be used for slope stability analysis using the shear strength reduction method. It can be used for stability analysis of all types of soil or rock slopes, including support and jointed rock.
|
Plane Failure Analysis FREE |
|
Analysis of the stability factor of a slope in a non-homogenous soil, using Bishop's method, with some additions. Includes a users manual, and theoretical background.
|
ROCK3D |
|
ROCK3D is a program for stability analysis of removable blocks on planar rock slopes. It identifies and analyses all the blocks that have formed under each kinematic mode. Once the geometry of the rock blocks has been identified, the bolt forces necessary to reach a required safety factor are calculated.
|
RockPack III |
|
RockPack III is a package of programs useful for all phases of rock slope analysis and design where stability is controlled by the orientations and characteristics of rock mass discontinuities (joints, bedding, foliations, faults, etc).
|
Slide |
|
Slide is a comprehensive 2D limit equilibrium slope stability program for all types of soil and rock slopes, embankments, dams and retaining walls. Slide includes finite element groundwater seepage, probabilistic analysis and support design.
|
SLOPE/W |
|
SLOPE/W can model heterogeneous soil types, complex stratigraphic and slip surface geometry, and variable pore-water pressure conditions using a large selection of soil models. Slope stability analyses can be performed using deterministic or probabilistic input parameters.
|
STABL |
|
STABL for Windows is the windows version of the well known and widely tested STABL series of slope stability programs.
|
STB FREE |
|
Analysis of the stability factor of a slope in a non-homogenous soil, using Bishop's method, with some additions. Includes a users manual, and theoretical background.
|
Wedge Failure Analysis FREE |
|
Analysis of the stability factor of a slope in a non-homogenous soil, using Bishop's method, with some additions. Includes a users manual, and theoretical background.
|
|
|
|
|
|
|
|
|
|
